|
Semtech Advanced Communications | |
Jitter Attenuation, Multiplying PLLSemtech’s Jitter Attenuating, Multiplying Phase Locked Loop (JAM PLL) family of products cleans up the jitter for high speed optical line cards, and provides low jitter clocks compliant up to OC-12/STM-4 spec. | |
Synchronous Equipment Timing Source PLLSemtech’s Jitter Attenuating, Multiplying Phase Locked Loop (JAM PLL) family of products cleans up the jitter for high speed optical line cards, and provides low jitter clocks compliant up to OC-12/STM-4 spec. | |
Timing Over Packet Networks (ToPSync)Semtech Timing over Packet Synchronization (ToPSync™) use the IEEE 1588 V2 Precision Time protocol to transport time or frequency over pack-based networks. This technology seamlessly enables packet networks to move to providing services more traditionally carried over circuit based networks such as SONET & SDH. This technology uses a very low data rate (typically 8kb/s) to deliver frequency, phase or time alignment with precision rivaling a typical GPS receiver. Semtech`s implementation of the IEEE 1588 V2 protocol is fully compatible with all Ethernet or IP networks. In addition, TopSync can supply FDD/TDD radio systems and circuit emulation systems with the synchronization signals they need -- greatly reducing the cost of clocking all wireless basestation equipment. Interoperability is ensured with ToPSync`s compliance to all the relevant parts of IEEE 1588 V2. ToPSync; more than just a protocol IEEE 1588 V2 (PTP) is a protocol for accurately recording and sending time-stamps of packets at PTP enabled nodes. The protocol is used in a slave to determine the flight time of a packet from a master to a slave or vice versa. The PTP protocol does not specify how to filter the packet delay variation (differences in flight times of packets between master & slave nodes). The packet delay variation (PDV) is very dependent on the network elements that the packet passes through, along with other conditions such as traffic loads and packet types. Semtech`s patented algorithm in the slave analyzes the packet delays in a sophisticated network analysis engine to determine the real time offset. This powerful analysis allows Semtech`s ToPSync to provide class-leading time alignment across heavily congested networks of switches and routers. | |
|
| General Sales:
+44 (0)1480 226600 | Commercial Assistance: Angie Parker +44 (0)1480 226603
| Technical Assistance: John Kain +44 (0)1480 226656 |
